Understanding, design and control of electrical properties and defect chemistry in electroceramics

发布日期:2020-01-16

理解、设计并控制电子陶瓷的电学特性及缺陷化学

<img width="122" height="152" src="/_vsl/C89E82A2C0B8D42B6624F2660B57E0ED/4493B463/2188" align="left" hspace="12" alt="说明: Image of Ming Li" word_img="/_vsl/C89E82A2C0B8D42B6624F2660B57E0ED/4493B463/2188" vsbhref="vurl" vurl="/_vsl/C89E82A2C0B8D42B6624F2660B57E0ED/4493B463/2188" vheight="152" vwidth="122" border:1px solid #ddd"/> 人:李明 博士

  University of Nottingham(英国诺丁汉大学)

报告时间:2020117日上午10:30

报告地点:知新楼C1111报告厅

         邀请人:王春明 教授


报告摘要:

Electroceramics exhibit a wide range of functional properties and find important applications in a vast number of energy and electronics devices, ranging from dielectrics, piezoelectrics and ferroelectrics used in modern electronic devices to pure electronic or ionic conductors and mixed ionic/electronic conductors for applications in fuel cells, batteries, membranes and thermoelectrics. Electroceramics often exhibit complex electrical behaviours involving different types of charge carriers (e.g., electrons, holes, ions) and inhomogeneity in different regions (e.g., grains, grain boundaries, surface layers). Such complex electrical behaviours are associated with defects and low levels of nonstoichiometry induced by impurities in raw materials, deliberate chemical doping or 'accidental' element loss/gain during sample processing.

This presentation starts with a brief overview on the development of BaTiO3-based electroceramics, followed by recent advances in understanding electrical properties and defect chemistry of Na1/2Bi1/2TiO3. The origins of giant permittivity in electroceramics are then discussed. Finally, a new approach is demonstrated to achieve simultaneously enhanced transport properties (oxide ion conductivity and electronic conductivity) and stability in a single-phase mixed ionic-electronic conductor based on perovskite oxide (BiSr)(CoFe)O3 by coupled tuning of bulk and surface chemistry. This presentation will highlight: (i) the challenges in measuring the electrical properties, interpreting the data and understanding the electrical conduction mechanisms in electroceramics; and (ii) the crucial importance of such understanding to design new materials and improve the performance of existing materials.

报告人简介:

Dr. Ming Li is an Assistant Professor at the Faculty of Engineering, University of Nottingham. He obtained his PhD in 2008 from the Department of Materials Science and Engineering, University of Sheffield under the supervision of Professor Derek Sinclair. Upon completing his PhD, he remained in the Sinclair group working as a Post-Doctoral Research Associate (PDRA) until March 2013. He then worked with Professor Matthew Rosseinsky FRS as a PDRA in the Department of Chemistry at the University of Liverpool before starting his independent academic career at the University of Nottingham in September 2014.

Dr. Li specialises in probing electrical conduction mechanisms and defect chemistry of electroceramics using a variety of electrical characterisation techniques, particularly Impedance Spectroscopy. This approach enables deep understanding of composition-structure-property relationships in electroceramics. His current research focuses on designing new energy/electronic materials, including dielectric, ferroelectric, piezoelectric materials for applications in modern electronic devices as well as pure electronic or ionic conductors and mixed ionic-electronic conductors for applications in solid oxide fuel cells, oxygen separation membranes and thermoelectrics. He has published over 50 papers in Nature Mater., Adv. Mater., Chem. Mater., Appl. Phys. Lett., J. Am. Ceram. Soc., etc.

Email: ming.li@nottingham.ac.uk

https://www.nottingham.ac.uk/engineering/people/ming.li